Crawlable tariff directory

Tariff lines beginning with 73

Browse the 168 8-digit 2026 China customs tariff lines whose first two digits are 73. Import and export rates share one page. Official Chinese product names remain the authority.

Each line is one 8-digit 税则号列. Import and export rates share the same page. Official 10-digit declaration codes appear only when we actually opened them.

Examples from this chapter: 钢铁板桩 · 角材、型材及异型材 · 钢轨 · 道岔尖轨、辙叉、尖轨拉杆及其他叉道段体 · 鱼尾板及钢轨垫板

  1. 73011000|钢铁板桩|1 ingested 10-digit code(s)
  2. 73012000|角材、型材及异型材|1 ingested 10-digit code(s)
  3. 73021000|钢轨|1 ingested 10-digit code(s)
  4. 73023000|道岔尖轨、辙叉、尖轨拉杆及其他叉道段体|1 ingested 10-digit code(s)
  5. 73024000|鱼尾板及钢轨垫板|1 ingested 10-digit code(s)
  6. 73029010|轨枕|1 ingested 10-digit code(s)
  7. 73029090|其他|1 ingested 10-digit code(s)
  8. 73030010|内径在500毫米及以上的圆形截面管|1 ingested 10-digit code(s)
  9. 73030090|其他|1 ingested 10-digit code(s)
  10. 73041110|外径大于等于215.9毫米,但不超过406.4毫米|1 ingested 10-digit code(s)
  11. 73041120|外径超过114.3毫米,但小于215.9毫米|1 ingested 10-digit code(s)
  12. 73041130|外径不超过114.3毫米|1 ingested 10-digit code(s)
  13. 73041190|其他|1 ingested 10-digit code(s)
  14. 73041910|外径大于等于215.9毫米,但不超过406.4毫米|1 ingested 10-digit code(s)
  15. 73041920|外径超过114.3毫米,但小于215.9毫米|1 ingested 10-digit code(s)
  16. 73041930|外径不超过114.3毫米|1 ingested 10-digit code(s)
  17. 73041990|其他-钻探石油及天然气用的套管、导管及钻管:|1 ingested 10-digit code(s)
  18. 73042210|外径不超过168.3毫米|1 ingested 10-digit code(s)
  19. 73042290|其他|1 ingested 10-digit code(s)
  20. 73042310|外径不超过168.3毫米|1 ingested 10-digit code(s)
  21. 73042390|其他|1 ingested 10-digit code(s)
  22. 73042400|其他不锈钢管|1 ingested 10-digit code(s)
  23. 73042910|屈服强度小于552兆帕斯卡的|1 ingested 10-digit code(s)
  24. 73042920|屈服强度大于等于552兆帕斯卡,但小于758兆帕斯卡的|1 ingested 10-digit code(s)
  25. 73042930|屈服强度大于等于758兆帕斯卡的-铁或非合金钢的其他圆形截面管:|1 ingested 10-digit code(s)
  26. 73043110|锅炉管|1 ingested 10-digit code(s)
  27. 73043120|地质钻管、套管|1 ingested 10-digit code(s)
  28. 73043190|其他|1 ingested 10-digit code(s)
  29. 73043910|锅炉管|1 ingested 10-digit code(s)
  30. 73043920|地质钻管、套管|1 ingested 10-digit code(s)
  31. 73043990|其他|1 ingested 10-digit code(s)
  32. 73044110|锅炉管|1 ingested 10-digit code(s)
  33. 73044190|其他|1 ingested 10-digit code(s)
  34. 73044910|锅炉管|1 ingested 10-digit code(s)
  35. 73044990|其他|1 ingested 10-digit code(s)
  36. 73045110|锅炉管|2 ingested 10-digit code(s)
  37. 73045120|地质钻管、套管|1 ingested 10-digit code(s)
  38. 73045190|其他|2 ingested 10-digit code(s)
  39. 73045910|锅炉管|2 ingested 10-digit code(s)
  40. 73045920|地质钻管、套管|1 ingested 10-digit code(s)
  41. 73045990|其他|2 ingested 10-digit code(s)
  42. 73049000|其他|1 ingested 10-digit code(s)
  43. 73051100|纵向埋弧焊接的|1 ingested 10-digit code(s)
  44. 73051200|其他纵向焊接的|1 ingested 10-digit code(s)
  45. 73051900|其他|1 ingested 10-digit code(s)
  46. 73052000|钻探石油或天然气用套管|1 ingested 10-digit code(s)
  47. 73053100|纵向焊接的|1 ingested 10-digit code(s)
  48. 73053900|其他|1 ingested 10-digit code(s)
  49. 73059000|其他|1 ingested 10-digit code(s)
  50. 73061100|不锈钢焊缝管|1 ingested 10-digit code(s)
  51. 73061900|其他-钻探石油及天然气用的套管及导管:|1 ingested 10-digit code(s)
  52. 73062100|不锈钢焊缝管|1 ingested 10-digit code(s)
  53. 73062900|其他-铁或非合金钢的其他圆形截面焊缝管:|1 ingested 10-digit code(s)
  54. 73063011|壁厚在0.7毫米及以下|1 ingested 10-digit code(s)
  55. 73063019|其他|1 ingested 10-digit code(s)
  56. 73063090|其他|1 ingested 10-digit code(s)
  57. 73064000|不锈钢的其他圆形截面焊缝管|1 ingested 10-digit code(s)
  58. 73065000|其他合金钢的圆形截面焊缝管|1 ingested 10-digit code(s)
  59. 73066100|矩形或正方形截面|1 ingested 10-digit code(s)
  60. 73066900|其他非圆形截面|1 ingested 10-digit code(s)
  61. 73069000|其他|2 ingested 10-digit code(s)
  62. 73071100|无可锻性铸铁制|1 ingested 10-digit code(s)
  63. 73071900|其他|1 ingested 10-digit code(s)
  64. 73072100|法兰|1 ingested 10-digit code(s)
  65. 73072200|螺纹肘管、弯管及管套|1 ingested 10-digit code(s)
  66. 73072300|对焊件|1 ingested 10-digit code(s)
  67. 73072900|其他|1 ingested 10-digit code(s)
  68. 73079100|法兰|1 ingested 10-digit code(s)
  69. 73079200|螺纹肘管、弯管及管套|1 ingested 10-digit code(s)
  70. 73079300|对焊件|1 ingested 10-digit code(s)
  71. 73079900|其他|1 ingested 10-digit code(s)
  72. 73081000|桥梁及桥梁体段
  73. 73082000|塔楼及格构杆
  74. 73083000|门窗及其框架、门槛
  75. 73084000|脚手架、模板或坑道支撑用的支柱及类似设备
  76. 73089000|其他
  77. 73090000|盛装物料用的钢铁囤、柜、罐、桶及类似容器(装压缩气体或液化气体的除外),容积超过300升,不论是否衬里或隔热,但无机械或热力装置|1 ingested 10-digit code(s)
  78. 73101000|容积在50升及以上|1 ingested 10-digit code(s)
  79. 73102110|易拉罐及罐体
  80. 73102190|其他
  81. 73102910|易拉罐及罐体
  82. 73102990|其他
  83. 73110010|零售包装用
  84. 73110090|其他
  85. 73121000|绞股线、绳、缆
  86. 73129000|其他
  87. 73130000|带刺钢铁丝;围篱用的钢铁绞带或单股扁丝(不论是否带刺)及松绞的双股丝
  88. 73141200|不锈钢制的机器用环形带
  89. 73141400|不锈钢制的其他机织品
  90. 73141900|其他
  91. 73142000|交点焊接的网、篱及格栅,其丝的最大截面尺寸在3毫米及以上,网眼尺寸在100平方厘米及以上
  92. 73143100|镀或涂锌的
  93. 73143900|其他
  94. 73144100|镀或涂锌的
  95. 73144200|涂塑的
  96. 73144900|其他
  97. 73145000|网眼钢铁板
  98. 73151110|自行车用
  99. 73151120|摩托车用
  100. 73151190|其他
  101. 73151200|其他链
  102. 73151900|零件
  103. 73152000|防滑链
  104. 73158100|日字环节链
  105. 73158200|其他焊接链
  106. 73158900|其他
  107. 73159000|其他零件
  108. 73160000|钢铁锚、多爪锚及其零件
  109. 73170000|钢铁制的钉、平头钉、图钉、波纹钉、U形钉(税目83.05的货品除外)及类似品,不论钉头是否用其他材料制成,但不包括铜头钉
  110. 73181100|方头螺钉
  111. 73181200|其他木螺钉
  112. 73181300|钩头螺钉及环头螺钉
  113. 73181400|自攻螺钉--其他螺钉及螺栓,不论是否带有螺母或垫圈:
  114. 73181510|抗拉强度在800兆帕及以上的
  115. 73181590|其他
  116. 73181600|螺母
  117. 73181900|其他
  118. 73182100|弹簧垫圈及其他防松垫圈
  119. 73182200|其他垫圈
  120. 73182300|铆钉
  121. 73182400|销及开尾销
  122. 73182900|其他
  123. 73194010|安全别针
  124. 73194090|其他别针
  125. 73199000|其他
  126. 73201010|铁道车辆用
  127. 73201020|汽车用
  128. 73201090|其他
  129. 73202010|铁道车辆用
  130. 73202090|其他
  131. 73209010|铁道车辆用
  132. 73209090|其他
  133. 73211100|使用气体燃料或可使用气体燃料及其他燃料的
  134. 73211210|煤油炉
  135. 73211290|其他
  136. 73211900|其他,包括使用固体燃料的
  137. 73218100|使用气体燃料或可使用气体燃料及其他燃料的
  138. 73218200|使用液体燃料的
  139. 73218900|其他,包括使用固体燃料的
  140. 73219000|零件
  141. 73221100|铸铁制
  142. 73221900|其他
  143. 73229000|其他
  144. 73231000|钢铁丝绒;擦锅器及洗刷擦光用的块垫、手套及类似品
  145. 73239100|铸铁制,未搪瓷
  146. 73239200|铸铁制,已搪瓷
  147. 73239300|不锈钢制
  148. 73239410|面盆
  149. 73239420|烧锅
  150. 73239490|其他
  151. 73239900|其他
  152. 73241000|不锈钢制洗涤槽及脸盆
  153. 73242100|铸铁制,不论是否搪瓷
  154. 73242900|其他22.5 东盟RASR,澳RAUR,韩RKRR
  155. 73249000|其他,包括零件18.8 东盟RASR,澳RAUR,韩RKRR
  156. 73251010|工业用
  157. 73251090|其他13.3 东盟RASR,韩RKRR13.8 日RJPR
  158. 73259100|研磨机用的研磨球及类似品
  159. 73259910|工业用
  160. 73259990|其他
  161. 73261100|研磨机用的研磨球及类似品
  162. 73261910|工业用
  163. 73261990|其他
  164. 73262010|工业用
  165. 73262090|其他
  166. 73269011|钢铁纤维及其制品
  167. 73269019|其他|3 ingested 10-digit code(s)
  168. 73269090|其他

Practical verification checklist

Scope · evidence · decision trail

Use the steps below to review this page. Verify the complete official text before making a decision. Seek qualified advice when needed.

  1. Define the decision

    State the exact decision, owner, deadline, trade direction and required evidence. Do this before you search.

  2. Identify every party

    Confirm each legal name and alias. Check registration, ownership, control, intermediaries, carriers, banks and beneficial owners.

  3. Describe the item

    Record the item’s function, operating principle, material, model and performance. Include software, technology, accessories and decisive parameters.

  4. Check classification

    Treat customs and export-control classification as separate tasks. Keep the facts, assumptions and reasoning for each result.

  5. Map the route

    Confirm origin, departure, destination and transit points. Include re-export, remote access, technology transfer and each delivery path.

  6. Verify end use

    Identify the stated purpose and real operating environment. Check integration, sensitive sectors, military links and prohibited uses.

  7. Verify end users

    Check the purchaser, consignee, end user, operator and parent company. Identify anyone who can redirect or control the item.

  8. Read the complete source

    Treat a search result as a lead. Read the official scope, definitions, notes, exclusions, annexes and licence conditions.

  9. Check current measures

    Use the version effective on the transaction date. Review later notices, temporary controls, destination measures and policy changes.

  10. Test exceptions carefully

    Prove every condition before using an exception or exemption. Apply the same rule to licence facilitation and general authorisations.

  11. Resolve contradictions

    Pause when names, codes, documents, routes, prices or explanations conflict. Obtain evidence instead of filling gaps with assumptions.

  12. Escalate uncertainty

    Send unresolved questions to the compliance owner or a qualified adviser. This includes classification, ownership, use, destination and licensing.

  13. Keep an audit trail

    Keep source links, files, checksums, screenshots, search terms and results. Record the reviewer, approvals and final reasoning.

  14. Schedule re-checks

    Set a new review date for open transactions. Re-check changing parties, destinations, specifications, official lists and licences.